Specification

TYPE
Two-door, two-seat, mid engine coupe.

DIMENSIONS AND WEIGHT
Length / Width / Height: 3,900 / 1,750 / 1,170 mm
Wheelbase: 2,415 mm
Track front / rear: 1,415 / 1,450 mm
Ground clearance: 150 mm
Fuel capacity: 40 L
Empty weight: 930 kg
Curb weight: 980 kg
Maximum weight: 1,200 kg
Weight distribution: 44 / 56 %
Trunk volume: 82 L

CHASSIS
Construction: Semi-monocoque made with 6000 series aluminium extrusions and sheets, with structural carbon fiber floor, bonded with aerospace adhesive and rivets. Steel subassembly for the engine, chromoly roll cage and aluminium flat floor.
Steering: rack & pinion
Steering ratio / Turns lock-to-lock: 15:1 / 2.8
Turning circle: 12 m

SUSPENSION
Suspension front: double wishbones, anti-roll bar
Suspension rear: double wishbones
Elastic element: coil springs
Shock absorbers: monotube, pressurized gas

BRAKES
Brakes: ventilated and perforated discs, 300 x 22 mm front and rear
Brake calipers: machined aluminium, 4 pistons front and rear

ENGINE
Model: Duratec
Location / alignment: mid transverse
Cylinders: 4 In-line
Block / head: aluminium / aluminium
Type: DOHC, 16 valves
Fuel system: EFI with turbo compressor and  intercooler
Displacement: 1,998 cc
Bore x stroke: 87.5 x 83.1 mm
Compression: 10:1
Maximum power: 186 kW / 250 hp @ 5,200 rpm
Maximum torque: 339 Nm / 250 lb-ft @ 3,950 rpm

TRANSMISSION
Type: 5 speed manual
Traction: RWD
Clutch: Single disc, dry
Final drive ratio: 4.067:1
 
PERFORMANCE
Power to weight ratio: 3.92 kg/hp
Specific output: 125 hp/litre
Maximum lateral acceleration: 1.1 G
Maximum speed: 260 km/h

TIRES AND WHEELS
Wheels: One-piece cast wheel, 17 x 7.5 front and rear
Front tires: 205/45 ZR17 88W
Rear tires: 235/45 ZR17 88W

EMISSIONS & FUEL CONSUMPTION
Urban cycle: 12 km/l
Extra-urban cycle: 18 km/l
Combined cycle: 15 km/l
CO2 Emissions: 195 g/km
Emissions compliance: EU5

SAFETY
Certification: VCA, low volume type approval /ECC
Equipment: Frontal aluminium and steel crashbox, three point seat belts, side protection bars, chromoly roll cage.